The activated carbon production line uses the most environmentally-friendly physical method to prepare the raw materials. The raw materials such as coconut husks and fruit husks are carbonized, crushed and screened to a certain particle size, and then enter the activation furnace. After activation, impurities such as gravel and iron nails are separated through a vibrating screen and a sand remover, and then mechanically crushed and screened into finished activated carbon of the required particle size.
Features of Shanghai Clirik Industry's Milling Line Improved for Activated Carbon
1. Activated carbon is a porous adsorbent. Therefore, water immersion must be prevented during transportation, storage and use. After water immersion, a large amount of water fills the active voids, making it ineffective.
2. During the use of activated carbon, tar-like substances should be prohibited from being brought into the activated carbon bed, so as not to block the gap of activated carbon and make it lose its adsorption effect.
3. When the activated carbon is stored or transported, prevent direct contact with the fire source to prevent fire.
4. The dust collector should be a pulse dust collector, covered with a needle felt felt bag, to achieve better collection and dust removal effects.