Maintenance procedure of powder grinder machine

Maintenance procedure of Powder grinder machine:

1, the use of the process of powder grinder machine should be fixed personnel responsible for the care, the operator must have a certain level of technology, milling machines involved in the operation must be carried out before installation and technical training, to understand the principle of the powder grinder machine performance, familiar with the operating procedures of powder grinder machine.
2, in order to make the powder grinder machine work properly, equipment maintenance safe operation of the system should be developed in order to ensure the long-term safety run of powder grinder machine, at the same time have the necessary maintenance tools and grease and accessories.
3, Powder grinder machine, after a period of maintenance, repair and replacement of wearing parts of the grinding roller mill grinding ring blade, mill roller device plug connection bolts and nuts before and after use should be carefully examined to see if there is loosening, add a little of the grease.
4 mill roller device use more than 500 hours or so to replace the grinding roller mill, replace the grinding roller mill, to deal with the roller kit Rolling cleaning, damaged parts should be replaced, refueling tool can be used to manually add the oil pump or grease gun.
 
Powder grinder machine is for super-fine grinding materials with hardness less than 6 in Moh‘s scale and humidity less than 6 percent such as kaolin, limestone, basalt, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds. The granularity (or final size) of the finished products can be freely adjusted between 325-3000meshes (0.045-0.0057mm), and the capacity (ton/hour) ranges from 0.4T/H to 12T/H depending on the final size and the grinding materials.