Rectorite ore is a kind of rare phyllosilicate clay minerals with special structure.
Rectorite has broad purposes, mainly used in coatings, construction aggregate, cement raw materials, firstly should process rectorite ore d into powder by grinding mill. Especially need to pay attention that rectorite has certain viscous, so must keep the raw material dry.
Rectorite powder processing equipment manufacturer:
Shanghai clirik machine co., ltd. is an old brand of the mine mill manufacturer, our mine mill have many kinds of types, such as HGM series three-ring and four-ring micro powder grinding mill, YGM series high pressure suspension mill, PC series European hammer mill, and crushers, elevators, packing machines and other related machines.
Applications of Rectorite powder processing equipment:
Grinding materials of our HGM series Rectorite powder processing equipment include various stones and rocks, such as: Kaolin, limestone, calcite, marbles, barites, gypsums, pyrophyllites, dolomites, calcium carbonates, pigments, clays, coals, carbon black, activated carbons, feldspar, talc, mica, carbon black, petroleum coke, alumina, chromic oxide, quartz, cements, up to more than 100 materials.
Working principle of Rectorite powder processing equipment:
The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse materials return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.
Model and technical data of HGM Rectorite powder processing equipment:
| Model | HGM80 | HGM90 | HGM100 | HGM100A | HGM125 |
| Ring Diameter(mm) | 800 | 900 | 1000 | 1000 | 1250 |
| Ring Number/pcs | 3 | 3-4 | 3-4 | 4 | 4 |
| Roller Number/pcs | 21 | 24-32 | 27-36 | 27-36 | 40-44 |
| Main Shaft Speed/r. p. min | 230-240 | 200-220 | 180-200 | 180-200 | 135-155 |
| Input Size/mm | ≤15 | ||||
| Finished Size/um | 5-47(325-3000) | ||||
| Capacity t/h | 0.4-4.5 | 0.4-5.5 | 0.4-6.5 | 0.4-7.5 | 0.7-10 |
| Outlet Size L*W*H/m | 13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 18*4.6*8.6 | 14*9*10.25 |
Model and technical data of HGM Rectorite powder processing equipment:
| Model | HGM80 | HGM90 | HGM100 | HGM100A | HGM125 |
| Ring Diameter(mm) | 800 | 900 | 1000 | 1000 | 1250 |
| Ring Number/pcs | 3 | 3-4 | 3-4 | 4 | 4 |
| Roller Number/pcs | 21 | 24-32 | 27-36 | 27-36 | 40-44 |
| Main Shaft Speed/r. p. min | 230-240 | 200-220 | 180-200 | 180-200 | 135-155 |
| Input Size/mm | ≤15 | ||||
| Finished Size/um | 5-47(325-3000) | ||||
| Capacity t/h | 0.4-4.5 | 0.4-5.5 | 0.4-6.5 | 0.4-7.5 | 0.7-10 |
| Outlet Size L*W*H/m | 13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 18*4.6*8.6 | 14*9*10.25 |
Should you have any questions, please do not hesitate to contact us.
Phone: 0086-21-20236178
Contact person: Cherry. Zhao
E-mail: clirik@grinding-mill.in
Technical advantages of Rectorite powder processing equipment:
1. The grinding mill of HGM80 is high efficient (twice as much as jet mill, mixing grinder and ball mill)
2. The spare parts of grinding mills can serve much longer time (2-3 times longer than that of impact mill or turbo mill.
3. High safety and reliability of the ultrafine mill (no rolling bearings and screws in the grinding cavity, so no problems caused by the wear of bearings or screws)
4. The HGM80 Grinding mills are characterized by high fineness (final size: 325-3000 mesh, D97<5 micron)
5. Environment-friendly
